1.
Open container, remove cooler and place it foil
side down on a flat surface.
2. Push straight down on the button. Within 20 seconds the NanoCool logo turns blue, indicating the cooling has begun. Touch the surface near the button to confirm this.
3. Load your product in the chamber, put the cooler back in its original position, close the container and tape it shut.
2. Push straight down on the button. Within 20 seconds the NanoCool logo turns blue, indicating the cooling has begun. Touch the surface near the button to confirm this.
3. Load your product in the chamber, put the cooler back in its original position, close the container and tape it shut.
