Expand all Collapse all
Expand FAQs Collapse FAQs

What is the NanoCool cooling technology?

With this on-demand evaporative cooling technology, a small amount of water at low pressure evaporates over days of operation, giving seven times the cooling power of melting ice. NanoCool’s active cooling process adjusts to variations in ambient temperature in a way that conventional cooling systems cannot.

Expand FAQs Collapse FAQs

How are the NanoCool systems activated?

Open the system, remove the cooling engine and place silver foil side down on a clean, hard, flat surface. With your thumb, push straight down on the button. Within seconds the NanoCool logo turns blue, indicating the cooling has begun. Load product in the chamber, replace cooling engine snugly, close the container and tape it shut.

How NanoCool systems are activated How NanoCool systems are activated How NanoCool systems are activated

Watch a system being activated here. [link to video]

Expand FAQs Collapse FAQs

How can I tell whether the NanoCool system has been activated?

Within twenty seconds of activation a thermochromic label on the cooling engine begins turning blue to show the word “NanoCool” which indicates that the device is working. You can also touch the cooling engine to feel that it is getting cool.

Expand FAQs Collapse FAQs

How long does it take the NanoCool system to cool down to a refrigerated temperature?

The cooling plate of the NanoCool system will cool from ambient to 5ºC in five minutes. It will take 60-90 minutes for the insulation box of the system to cool from ambient to 5ºC.

Expand FAQs Collapse FAQs

How should the NanoCool system be packed?

  • If adding filler such as paper, bubble wrap or peanuts, be sure to leave some space so that cool air can circulate from the cooling lid.
  • If adding a temperature monitor, keep it as near to your product as possible. Do not allow it to touch the cooling engine and avoid placing it in the corners. Remember that—depending on the packout—product and monitor can move during shipment.
  • As with all cooling elements, there can be some modest condensation on the cooling engine. If product protection against condensation is desired, two common approaches are to place your product into a plastic bag or place absorbent material on top of your product.
Expand FAQs Collapse FAQs

How long will the NanoCool system cool my product?

It depends on which system you have. System durations range from 48 to 96 hours. Please see brochures for Universal Systems and Cooling Systems.

Expand FAQs Collapse FAQs

Are NanoCool systems pre-qualified?

Each size and type of NanoCool system has been tested to demonstrate its thermal performance and durability. Qualification reports are available upon request.

Expand FAQs Collapse FAQs

What is the NanoCool 2-8ºC universal system?

These systems protect against heat like other NanoCool cooling systems while also providing superior protection against cold weather. They are designed for all season use.

Expand FAQs Collapse FAQs

What is the useful life of the NanoCool system?

NanoCool systems have a two year expiry from date of manufacture. The expiry date can be found on the outside front panel of the outer carton of the system.

Expand FAQs Collapse FAQs

Is the NanoCool system reusable?

The cooling engine can be used only once.

NanoCool Universal Systems are designed for single-use shipments. However, the insulation box of the Universal System can be used up to three times (the initial use and then two reuses) provided that the boxes are re-inspected and reconditioned properly. To recondition the insulation box of the Universal System, remove the used cooling engine and store at 22°C or above for 72 hours.

The insulation box of Cooling Systems can be reused four times within its two year expiry date. Replacement cooling lids can be ordered separately.

Expand FAQs Collapse FAQs

How do you dispose of the NanoCool system?

All components of the NanoCool system are made from benign materials that have no extraordinary disposal rating. Dispose of in accordance with local, state, and federal regulations. For more details about the components, including SDS information, please request a Product Data Sheet.

Expand FAQs Collapse FAQs

Are there any special storage requirements for NanoCool systems?

Because there are no gel packs, and no need to refrigerate or freeze anything, NanoCool packaging can be stored at normal warehouse temperatures.